Product specifications AutoVu SharpZ3
PoE module
Function
Connect up to four PoE devices
Ports
Four 10/100/1000 Base-T Ethernet ports with ix Industrial
TM
connectors
PoE+ capable - 802.3at Type 2 (30.0 W)
Power
3 W power consumption for module operation
(60 W total power budget for all POE ports and modules combined)
Navigation module
Function
Integrated inertial sensors with automotive dead reckoning
30 Hz navigation rate capable
Auto-calibration of inertial sensors
Connectivity
Multi-constellation single-band (L1) GNSS receiver (US-GPS and
Galileo-enabled by default, GLONASS-supported)
Input for wheel ticks signal or external odometry sensor
Power
1.1 W
Function
Auxiliary wheel imaging camera unit
Sensor
2 MP sensor with 4.0 mm lens
Power
PoE 802.3af Type 1 (5.8 W)
lluminators
Built-in IR illumination
Function
Wide-angle street-view imaging camera unit
Sensor
2 MP sensor with 2.4 mm or 6.0 mm lens
Power
PoE 802.3af Type 1 (5.8 W)
lluminators
Built-in IR illumination
UPDATED:
DEC-3-2025
© Genetec Inc., 2025. Genetec, AutoVu, AutoVu MLC, and the Genetec logo are trademarks of Genetec Inc., and
may be registered or pending registration in several jurisdictions. Other trademarks used in this document may be
trademarks of the manufacturers or vendors of the respective products.
Genetec Inc.
genetec.com/locations
info@genetec.com
@genetec
Optional modules
Auxiliary camera
Overview context camera
The base unit for the SharpZ3 cameras allows for up to three optional plug-in modules.
