Issue link: https://resources.genetec.com/i/1343608
Give your access control system wings. www.mercury-security.com Serial I/O Controller Authentic Mercury MR serial Input/output (SIO) devices represent the secondary level in Mercury's distributed architecture. The devices offer fl exibility to our OEM partners, ensuring they can choose the controller that best fi ts their needs. The multi-device MR16IN interface panel is dedicated to point control and monitoring and enables OEMs to support 16 general-purpose input circuits. The circuits can be individually set for sensitivity ranges, timing parameters (normally-open or normally-closed operations) and end- of-line resistance values. They can also be declared supervised and non-supervised. Two programmable relay outputs are confi gurable for fail-safe or fail secure operation, supporting "On", "Off", "Pulse", and "Repeating Pulse" commands. With these powerful control-point capacities onboard, the MR16IN can control outboard devices; it can also be activated by the condition of selected system devices, either locally or regionally, without host intervention. The MR16IN is an ideal choice for an interface panel that provides OEMs the ability to monitor high concentrations of inputs combined with low requirements for output control. Application Notes The Mercury MR16IN is an essential component that supports Mercury's fl exible, building-block approach to access control system design. The MR16IN provides the capacity to link, control and respond to an array of sensors. With its RS-485 connectivity, the MR16IN can be clustered or distributed to best suit each installation environment. Features • 16 programmable inputs; 2 programmable relay outputs • 2-wire RS-485 communication • AES 128 bit data encryption • Universal I/O device characterization • Confi gurable input parameters • Universal system compatibility with Authentic Mercury intelligent controllers Benefi ts • Initiates commands by operator, by time schedules, or by events • Allows for easy and compact clustering of up to 16 uniquely monitored devices • Allows standard and range based supervision with end-of-line resistance