EN-Synergis Locks

Schlage • AD-400 AD-400 electronic lock specifications Modulation 900 MHz spread spectrum, direct sequence, 10 channels Frequency range 902-928 MHz Transmission/encryption AES-128 bit key Credential verification time < 1 second 1 Wake-Up on Radio Responds to lock/unlock command from host in less than 10 seconds in battery powered applications (per field configuration) Communication range Up to 200 with obstructions (normal building construction), up to 1000 clear line of sight RF interference avoidance Configurable dynamic channel switching Data rate RF: 40 kbps Visual/audible communications Tri-colored LED's and audible indicators (field configurable) System interface RS-485, Wiegand, or Clock & Data via PIM400 to host Power supply 4AA, 8AA, 12 VDC or 24 VDC Voltage range 4 VDC to 26 VDC Max current requirement Up to 250 mA Battery life Up to 2 yrs with 4AA Operating temperature/ exterior -31° to 151°F (-35° to 66°C) Operating temperature/ interior 32° to 120°F (0° to 49°C) (battery) Operating humidity 0 - 100% non-condensing Certifications ANSI/BHMA A156.25, ANSI/BHMA Grade 1, UL 294, UL10 C, FCC Part 15, ADA, RoHS Accessories Panel Interface Module (PIM400), SUS-A Cable used with SUS Android mobile app, remote antennas for PIM400 to extend range, Dry Contact Relay Board (RLBD) may be required for supervised inputs (Wiegand systems) Reliable communications Secure and reliable wireless communication with the Panel Interface Module (PIM) is accomplished using 900 MHz frequency. 900 MHz band enables longer transmission ranges because signal propagation with longer wavelengths travel a greater distance and better penetrate typical building construction – allowing for simplified system design. Wake-Up on Radio This feature enables implementation of wireless locks in applications where centralized lockdown or unlock is required. 'Wake Up on Radio' utilizes patent-pending technology to enable real-time activation at a remote battery-powered wireless lock. The technology is configurable from 10 to 1 second increments. When Wake-Up on Radio is used in critical applications Dynamic Channel Switching should also be enabled. Panel Interface Module (PIM400) The PIM400 (sold separately) is required for communication between the AD-400 wireless lock and the access control panel, and can support up to 16 locks depending on your access control system. § Interior push button 3 § Interior cover tamper guard 3 § Battery status § Communication status 3 § Request-to-enter 3 Functions § Classroom/storeroom 2 § Office 2, 3 § Privacy 3 § Apartment 3 Available status signals § Lock/unlock status 4 § Request-to-exit § Door position § Mechanical key override 3 § Deadbolt position 3 Access control management system Access Control Panel (ACP) AD-400 (up to 16 locks) Panel Interface Module (PIM400) 1 Lock requires less than 100 msec, response time does not include latency time of ACP. 2 Classroom/storeroom and office function not available with mortise deadbolt option. 3 Consult your Physical Access Control Soware (PACS) provider for specific scope of support. Interior pushbutton, mechanical key override and deadbolt position are only available when linked via PIM400-485. 4 Soware indicates lock/unlock status based on sequence of events, but cannot validate mechanical clutch position unless monitored on RS-485 connection.

• Cover