EN-Synergis Locks

Allegion Schlage PIM400-485 Panel interface module

Issue link: https://resources.genetec.com/i/1343947

Contents of this Issue

Navigation

Page 1 of 1

PIM400-485 specifications Frequency range 902-928 MHz Modulation 900 MHz spread spectrum, direct sequence, 10 channels RF interference avoidance Optional dynamic channel switching Transmission/encryption AES-128 bit key (optional) Credential verification time < 1 second 1 Communication range Up to 200 (61 m) with obstructions Up to 1000 (305 m) clear line of sight Up to 2000 (609 m) line of sight with high gain antenna on PIM400 Up to 4000 (1219 m) line of sight with high gain antennas on PIM400 and WRI400 Visual/audible communications 5 LEDs for status indicators System interface RS-485 Power supply 12 VDC or 24 VDC Voltage range 9.5 VDC to 26 VDC Max current requirement Up to 250 mA Operating temperature -31° to 151°F (-35° to 66°C) Operating humidity 0% to 100% non-condensing Dimensions (H x W x D) 6.3" x 3.2" x 2.2" (16.0 cm x 8.13 cm x 5.59 cm) Weight 1.25 lb (.56 kg) Cable specifications DC power Input: 18AWG, 2 conductor (Belden 8760 or equivalent) up to 1000 (305 m) PIM400-485 to ACP: 24AWG, 2 or 4 conductor shielded (Belden 9842, 9841 or equivalent) up to 4000 (1219 m) Data rate RF: 40 kbps; RS-485: 9.6 kbps Certifications NEMA 1, 4, 4X, 6; UL 294; FCC Part 15; Industry Canada (IC); RoHS Ordering information § PIM400-485 –Panel Interface Module with outdoor enclosure standard. Supports up to 16 access points via RS-485 with select brands of access control panels. Optional accessories § ANT400-REM-I/O – Omni-directional remote indoor/ outdoor antenna module. Requires available grounding kit (MGB+MCA5) for outdoor installations § ANT400-REM-I/O+6dB – Directional, flat panel, remote indoor/outdoor antenna with 6dB of gain. Requires available grounding kit (MGB+MCA5) for outdoor installations § MGB+MCA5 – Grounding kit for outdoor installations § ANT400-REM-CEILING – Omni-directional ceiling mount indoor remote antenna § ANT400-REM-HALL – Bi-directional indoor hall application remote antenna § SUS-A Cable – for use with SUS mobile app on compatible Android devices § 593PI-12DC – 12 VDC power supply 1 Dependant on latency time of access control panel. Additional features Reliable communications 900 MHz band enables longer transmission ranges. In general, signal propagation with longer wavelengths travel a greater distance and penetrate through, and around objects better than signals with shorter wavelengths. Online communications (heartbeat) Regular communications between the AD-Series wireless access module and PIM400 monitor transmission presence and integrity. Online communications enable the PIM400 to download information or instructions such as unlock and relock. Auto addressing (linking) One of the final steps in the installation process is called "linking". Linking ties a specific wireless access module to a selected PIM400 and assigns a unique address. There are over 65,000 unique addresses available per channel, providing nearly a million combinations for virtually unlimited scalability. Assured communications A Packet-Error-Rate-Test (PERT) is performed during linking at reduced power levels to ensure reliable communication during operation. Encoded transmissions Each RF transmission is encrypted with AES-128 bit keys to provide virtually uncompromisable security. Tamper The PIM400 cover is monitored by an optical tamper switch. Visual indications § Power on § Microprocessor running § Linking status § PIM receiving RF data § PIM transmitting RF data § PIM receiving RS-485 data § PIM transmitting RS-485 data § PIM firmware version § PIM tamper status Access point status available through RS-485 connection § Card and keypad data § Door position § Loss of RF communication § Request-to-exit § Request-to-enter § Low battery § PIM tamper § Mechanical key override § Deadbolt position § Interior cover tamper guard § Lock/unlock status § Interior push button Configurable items from PIM400-485 § Wake-Up on Radio (WOR) § Heartbeat frequency § Relock parameters § Card data format conversion § Extended unlock § Fail safe/fail secure/fail as-is § Door held pre-alarm § Cache memory parameters § Dynamic channel switching (DCS) § Reader configuration § Keypad configuration § Inside pushbutton configuration § User interface configuration Allegion (NYSE: ALLE) is a global pioneer in safety and security, with leading brands like CISA ® , Interflex ® , LCN ® , Schlage ® , SimonsVoss ® and Von Duprin ® . Focusing on security around the door and adjacent areas, Allegion produces a range of solutions for homes, businesses, schools and other institutions. Allegion is a $2 billion company, with products sold in almost 130 countries. For more, visit www.allegion.com. About Allegion © 2020 Allegion 004447, Rev. 09/20 www.allegion.com/us

Articles in this issue

Links on this page

view archives of EN-Synergis Locks - Allegion Schlage PIM400-485 Panel interface module