Issue link: https://resources.genetec.com/i/1509759
phg IO Panel Efficient door control and monitoring Key features Supports the connection of up to two doors Four configurable supervised or unsupervised inputs Four relays (configurable NC/NO), 30VDC Geared with a Cycoloy C 1200 HF WH9A289 enclosure that protects components from damage Connections and indicators are fully identified by silk-screened nomenclature on the panel Compact dimensions Wide temperature variation The phg IO panel is a complete hardware and firmware door interface module for Security Center Synergis. It empowers you to ensure secure door access, whether it's locking, unlocking, or monitoring doors, by capturing the status of sensors and controlling the door latch. Its sleek and compact design makes deploying the Synergis IO panel a breeze, making it an ideal choice for setups without door controllers or when using readers in transparent mode. It connects to Synergis™ Cloud Link via an OSDP secure channel over RS-485, reports all activity back to the access manager, and processes real-time door commands. Product specifications Key benefits Simple and efficient input monitoring and door control The phg IO panel acts as a door module to relay door status and position as well as operate the locking mechanism. Its lean design makes deployment easier and provides sufficient input and output capabilities to control up to two doors. Scalability This interface module is expandable within your architectural needs as it allows you to connect up to 16 phg IO panels onto the same RS-485 port on Synergis Cloud Link using an OSDP secure connection. It allows you to mix OSDP readers and IO boards onto the same port as needed. Customization of supervised inputs configuration Resistor values for supervised inputs are configurable with Security Center. Supervised inputs can be monitored for various states such as normal, active, cut, short, and trouble. This lets operators efficiently detect if there's been a breach inside the system.