Issue link: https://resources.genetec.com/i/1516448
Product specifications Axis Powered by Genetec A1210 and A1610 UPDT: 02-APR-2025 Genetec Inc. genetec.com/locations info@genetec.com @genetec Security Center/ Synergis servers Security Center client interface Readers Axis Powered by Genetec A1210/A1610 IP Network Hardware specifications System memory 512 MB RAM, 2 GB Flash Device support Up to 2 OSDP readers or 1 Wiegand reader 12VDC output, max 500 mA; 1 door 4 inputs and 2 configurable I/Os 1x Form C Relay: 2A at 30VDC Up to 250K credentials and 150K events stored locally - Security Center on-premises Up to 40K credentials and 150K events stored locally - Security Center SaaS Warranty 5 years Electrical 12V DC Power input Mechanical 144 x 122 x 50 mm (5.7 x 4.8 x 2.0 in) 645 g (1.4 lbs) Environment Operating conditions: 0°C to 55°C (32°F to 131°F); Humidity 20-85% RH (non-condensing) Security Password protection, IP address filtering, HTTPS encryption, IEEE 802.1x (EAP-TLS) network access control, digest authentication, user access log, centralized certificate management, brute force delay protection, signed firmware, secure boot, secure keystore (CC EAL6+ certified) Supported communications protocols Supported protocols: IPv4, IPv6, HTTP, HTTPS, TLS, QoS Layer 3 DiffServ, SMTP, mDNS Bonjour, UPnP, SNMP v1/v2c/v3 (MIB-II), DNS/ DNSv6, DDNS, NTP, RTSP, RTCP, RTP, TCP, UDP, IGMPv1/v2/v3, DHCPv4/v6, SOCKS, SSH, MQTT v3.1.1, Syslog Certifications and standards Approvals: EAC, EN 55035, EN 55032 Class B, EN 50130-4, EN 61000-3- 2, EN 61000-3-3, FCC Part 15 Subpart B Class A, ICES-003 Class A, VCCI Class A, RCM AS/NZS CISPR 32 Class A, KC KN32 Class B, KC KN35, OSDP Verified Safety: IEC/EN/UL 62368-1, UL 294, UL 2043 Environment: NEMA TS 2 (2.2.7-2.2.9), IEC 60068-2-1, IEC 60068-2-2, IEC 60068-2-6, IEC 60068-2-14, IEC 60068-2-27, IEC 60068-2-78 Others: CSA C22.2 No. 205-1983 512 MB RAM, 2 GB Flash Up to 4 OSDP or up to 2 Wiegand readers 2x 12VDC output, max 486 mA; 1-2 wired doors 6 inputs and 4 configurable I/Os 2x Form C Relay: 2A at 30VDC Up to 250K credentials and 150K events stored locally - Security Center on-premises Up to 40K credentials and 150K events stored locally - Security Center SaaS 5 years 10.5 - 28V DC Power input 175 x 175 x 60 mm (6 7/8 x 6 7/8 x 2 3/8 in) 1.2 kg (2.6 lbs) Operating conditions: -40°C to 55°C (-40°F to 131°F); Humidity 20-85% RH (non-condensing) UL 294: 0°C to 55°C (32°F to 131°F) Password protection, IP address filtering, HTTPS encryption, IEEE 802.1x (EAP-TLS) network access control, digest authentication, user access log, centralized certificate management, brute force delay protection, signed firmware, secure boot, secure keystore (CC EAL6+ certified) Supported protocols: IPv4, IPv6, HTTP, HTTPS, TLS, QoS Layer 3 DiffServ, SMTP, mDNS Bonjour, UPnP, SNMP v1/v2c/v3 (MIB-II), DNS/ DNSv6, DDNS, NTP, RTSP, RTCP, RTP, TCP, UDP, IGMPv1/v2/v3, DHCPv4/v6, SOCKS, SSH, MQTT v3.1.1, Syslog Approvals: EN 55032 Class A, EN 50130–4, EN 61000-3-2, EN 61000-3- 3, EN 55035, EN 61000-6-1, EN 61000-6-2, FCC Part 15 Subpart B Class A, ICES-003 Class A, VCCI Class A, RCM AS/NZS CISPR 32 Class A, KS C 9832 Class A, KS C 9835, OSDP Verified Safety: IEC/EN/UL 62368-1, CAN/CSA C22.2 No 62368-1, UL 294 Environment: EN 50581 Axis Powered by Genetec A1210 network door controller Axis Powered by Genetec A1610 network door controller Axis Powered by Genetec architecture © 2025 Genetec Inc. All rights reserved. Genetec, and the Genetec logo are trademarks of Genetec Inc., and may be registered or pending registration in several jurisdictions. Other trademarks used in this document may be trademarks of the manufacturers or vendors of the respective products. Please recycle