Issue link: https://resources.genetec.com/i/1516448
Product specifications Axis Powered by Genetec UPDT: 22-FEB-2024 Genetec Inc. genetec.com/locations info@genetec.com @genetec Security Center/ Synergis servers Security Center client interface Readers AXIS A1610/A1210 - Powered by Genetec IP Network Hardware specifications System memory 512 MB RAM, 2 GB Flash Device support Up to 2 OSDP readers or 1 Wiegand reader 12VDC output, max 500 mA; 1 door 4 inputs and 2 configurable I/Os 1x Form C Relay: 2A at 30VDC Up to 250,000 credentials and 150,000 events stored locally Warranty 5 years Electrical 12V DC Power input Mechanical 144 x 122 x 50 mm (5.7 x 4.8 x 2.0 in) 645 g (1.4 lbs) Environment Operating conditions: 0°C to 55°C (32°F to 131°F); Humidity 20- 85% RH (non-condensing) Security Password protection, IP address filtering, HTTPS encryption, IEEE 802.1x (EAP-TLS) network access control, digest authentication, user access log, centralized certificate management, brute force delay protection, signed firmware, secure boot, secure keystore (CC EAL6+ certified) Supported communications protocols Supported protocols: IPv4, IPv6, HTTP, HTTPS, TLS, QoS Layer 3 DiffServ, SMTP, mDNS Bonjour, UPnP, SNMP v1/v2c/v3 (MIB-II), DNS/DNSv6, DDNS, NTP, RTSP, RTCP, RTP, TCP, UDP, IGMPv1/v2/v3, DHCPv4/v6, SOCKS, SSH, MQTT v3.1.1, Syslog Certifications and standards Approvals: EAC, EN 55035, EN 55032 Class B, EN 50130-4, EN 61000-3-2, EN 61000-3-3, FCC Part 15 Subpart B Class A, ICES-003 Class A, VCCI Class A, RCM AS/NZS CISPR 32 Class A, KC KN32 Class B, KC KN35, OSDP Verified Safety: IEC/EN/UL 62368-1, UL 294, UL 2043 Environment: NEMA TS 2 (2.2.7-2.2.9), IEC 60068-2-1, IEC 60068-2-2, IEC 60068-2-6, IEC 60068-2-14, IEC 60068-2- 27, IEC 60068-2-78 Others: CSA C22.2 No. 205-1983 512 MB RAM, 2 GB Flash Up to 4 OSDP or up to 2 Wiegand readers 2x 12VDC output, max 486 mA; 1-2 wired doors 6 inputs and 4 configurable I/Os 2x Form C Relay: 2A at 30VDC Up to 250,000 credentials and 150,000 events stored locally 5 years 10.5 - 28V DC Power input 175 x 175 x 60 mm (6 7/8 x 6 7/8 x 2 3/8 in) 1.2 kg (2.6 lbs) Operating conditions: -40°C to 55°C (-40°F to 131°F); Humidity 20- 85% RH (non-condensing) UL 294: 0°C to 55°C (32°F to 131°F) Password protection, IP address filtering, HTTPS encryption, IEEE 802.1x (EAP-TLS) network access control, digest authentication, user access log, centralized certificate management, brute force delay protection, signed firmware, secure boot, secure keystore (CC EAL6+ certified) Supported protocols: IPv4, IPv6, HTTP, HTTPS, TLS, QoS Layer 3 DiffServ, SMTP, mDNS Bonjour, UPnP, SNMP v1/v2c/v3 (MIB-II), DNS/DNSv6, DDNS, NTP, RTSP, RTCP, RTP, TCP, UDP, IGMPv1/v2/v3, DHCPv4/v6, SOCKS, SSH, MQTT v3.1.1, Syslog Approvals: EN 55032 Class A, EN 50130–4, EN 61000-3- 2, EN 61000-3-3, EN 55035, EN 61000-6-1, EN 61000-6-2, FCC Part 15 Subpart B Class A, ICES-003 Class A, VCCI Class A, RCM AS/NZS CISPR 32 Class A, KS C 9832 Class A, KS C 9835, OSDP Verified Safety: IEC/EN/UL 62368-1, CAN/CSA C22.2 No 62368-1, UL 294 Environment: EN 50581 AXIS A1210 network door controller Powered by Genetec AXIS A1610 network door controller Powered by Genetec Axis Powered by Genetec architecture © 2024 Genetec Inc. All rights reserved. Genetec, and the Genetec logo are trademarks of Genetec Inc., and may be registered or pending registration in several jurisdictions. Other trademarks used in this document may be trademarks of the manufacturers or vendors of the respective products. Please recycle