Issue link: https://resources.genetec.com/i/917976
Cloud-ready With authenticated communications between your hardware and the cloud, Synergis Cloud Link provides a safe way to a truly open architecture. Cost-efficient Save time and money by reducing the need for off- the-shelf servers and all the costs and resources needed to maintain them. Reliable Intelligence at the edge even during network or server outages. This ensures that your people and assets are always safe. Scalable With up to 256 locks and readers per Synergis Cloud Link, you can scale your system as needed. Deploy additional units to expand your system further. Product specifications Synergis Cloud Link A cloud-ready gateway Hardware specifications UPDATED: 12-AUG-2024 © Genetec Inc., 2024. Genetec, Genetec Cloudink, Synergis and the Genetec Logo are trademarks of Genetec Inc., and may be registered or pending registration in several jurisdictions. Other trademarks used in this document may be trademarks of the manufacturers or vendors of the respective products. Genetec Inc. genetec.com/locations info@genetec.com @genetec Natively cloud-ready, Synergis Cloud Link provides a secure, scalable, and flexible way to fully run your access control system in the cloud with Security Center SaaS. It ensures authenticated communication between hardware and the cloud, extending your physical security to the edge. Synergis Cloud Link offers enhanced flexibility and security across all deployment types, whether on-premises, hybrid, or in the cloud. This smart IIoT gateway links your existing on-premises hardware, like controllers, modules, and electronic locks, to the cloud reliably and securely. Supported hardware Choose from a growing ecosystem of hardware solutions: Benefits Processor Quad-core, 64-bit CPU System Memory 4 GB RAM 16 GB flash storage Interfaces Two (2) 10/100/1000 Mbps Gigabit Ethernet ports Four on-board inputs (supervised or unsupervised) Four embedded RS-485 ports (version-312 with 12 ports available) Secure element: EAL6+ Electrical 9-16VDC or PoE (IEEE 802.3af or 802.3at type 1) on one (1) Ethernet port Mechanical Appliance dimensions (L x W x H): 7.24 x 4.48 x 1.39 inches (18.4 x 11.4 x 3.5 cm) Appliance weight: 1 lb 1 oz (475 g) Environment Temperature: 32°F to 122°F (0°C to 50°C) operational Relative humidity: Operating 5% to 95%, non-condensing For indoor use only Warranty 24 months Certification CE, UK, FCC, KC, ACMA, BIS, UL294 (listed subassembly), RoHS, REACH, WEEE Secure Crypto Chip Version -312 includes 3 slots for Secure Access Module (SAM) Downstream device support 32 Mercury Security MP or LP panels (up to 256 readers) 128 ASSA ABLOY IP locks (PoE or WiFi) 64 ASSA ABLOY Aperio-enabled wireless locks (both RS-485 and IP hubs are supported) 200 Allegion Schlage NDE, LE and Control locks 1 256 Allegion Schlage AD-Series, NDE and LE locks 2 256 SimonsVoss SmartIntego locks Up to 16 I/O panels per RS-485 port 1- Via Synergis Cloud Link 2- Via a Mercury intelligent controller