EN-Synergis Controllers

HID Mercury Security MR50 Interface Module

Issue link: https://resources.genetec.com/i/1343614

Contents of this Issue

Navigation

Page 0 of 1

Overview Connects to the HID Mercury Security controllers over high-speed RS-485 network. Reports all activity in real-time to Synergis Cloud Link and HID Mercury Security controllers Manages a single door Manages 2 general-purpose input monitor points and 2 control relays Reports supervised inputs Some inputs can be configured as general purpose inputs UL 294 recognized components OSDP v1 and v2 supported Available Interfaces Readers: 1 reader port, up to 2 readers (entry and exit) when connected to OSDP readers. Inputs: 2 general purpose: programmable circuit type 1 dedicated tamper Outputs: Relay 1: Form–C, 5 Amp 30 Vdc Relay 2: Form–C, 2 Amp 30 Vdc Seamlessly integrated with the Genetec Synergis IP Access Control Solution The Synergis™ system supports HID Mercury Security's open field hardware enabling organizations to deploy industry-standard access control modules and protect their investments for years to come. The MR50 reader interface module controls a single door. Supporting a range of wired and wireless reader technology, the MR50 is managed by a HID Mercury Security EP/LP1501, EP/LP1502, EP/LP2500 and EP/LP4502 controller through a high-speed RS-485 network and ultimately, the Synergis Cloud Link appliance over IP. Product specifications HID Mercury Security MR50 Interface Module Reader and IO interface module for up to 1 door The Synergis Cloud Link appliance is an intelligent and PoE-enabled IoT gateway that supports a mix of non-proprietary access control modules like HID Mercury Security MR50 Interface Module. Synergis Cloud Link HID Mercury Security MR50 Interface Module part of HID Global

Articles in this issue

view archives of EN-Synergis Controllers - HID Mercury Security MR50 Interface Module