Issue link: https://resources.genetec.com/i/1516859
Security Center System Requirements Performance with transcoding H.264/H.265 Input Resolution @30fps VGA 640 x 480 HD 1280 x 720 Full HD 1920 x 1080 Ultra HD 3840 x 2160 Average bit rate per camera 1 Mbps 2.3 Mbps 5.5 Mbps 20 Mbps Recommended 45 streams, 50 Mbps / 39 streams, 43 Mbps 30 streams, 60 Mbps / 15 streams, 30 Mbps 16 streams, 100 Mbps / 6 streams, 12 Mbps 6 streams, 120 Mbps / 1 streams, 20 Mbps Media transcoding applications server 55 streams, 60 Mbps / 65 streams, 70 Mbps 50 streams, 100 Mbps / 50 streams, 100 Mbps 26 streams, 160 Mbps / 26 streams, 160 Mbps 7 streams, 140 Mbps / 8 streams, 160 Mbps NOTE: Bitrate is for input streams only. Output resolution is VGA. Considerations There is a hard limit around 500 connections, the values in the table are obtained with 30 fps, if the framerate is reduced and the throughput remains under the maximum values in the table, then the number of connections can be increased linearly. When transcoding, output is resized to resolutions of 640x480 (VGA) or less, maintaining the aspect ratio. CAUTION: Do not host Media Gateway on the same server as an Archiver. The Media Gateway role can use significant processing power. High CPU usage on the Archiver server can result in Archiving queue full situations that might lead to data loss. techdocs.genetec.com | Security Center System Requirements Guide 5.12 EN.500.100-V5.12.0.0(4) | Last updated: February 6, 2024 13