Issue link: https://resources.genetec.com/i/1516859
Security Center System Requirements Maximum number of units supported in Unit Assistant role batch operations To ensure optimal performance, do not exceed the maximum number of video and access control units supported in Security Center 5.12 Unit Assistant role (UAR) batch operations. Some operations, like password change and certificate updates for a camera or an access control unit, require the unit to be reconnected. Be sure to schedule these operations during non-critical periods. IMPORTANT: Monitor the server CPU usage if normal usage is already high to ensure that UAR operation does not introduce undesirable impacts. The maximum number of units supported by each server type in Security Center 5.9.1.0 and later is as follows: Server Type Recommended High-performance 5.11 and 5.12 (Passwords and certificates) 5.11 and 5.12 (Passwords and certificates) Passwords Certificates Passwords Certificates • Batch of 10,000 units • CPU usage increased over 80% during operation • No impact on system Not tested. The numbers are expected to be similar to those of high-performance servers. • Batch of 10,000 units • Low CPU increase • No impact on system Video: • Batch of 1,000 units • Low CPU increase • No impact on system Access control: • Batch of 100 units • Low CPU increase • No impact on system 5.9.2.0 to 5.10.4.0 (Video and access control passwords) 5.9.2.0 to 5.10.4.0 (Video and access control passwords) • Batch of 3,000 units • CPU usage increased over 80% during operation • No impact on system • Batch of 7,000 units • Low CPU increase • No impact on system Directory & UAR 5.9.1.0 (Video passwords only) 5.9.1.0 (Video passwords only) techdocs.genetec.com | Security Center System Requirements Guide 5.12 EN.500.100-V5.12.0.0(4) | Last updated: February 6, 2024 16